|
Post by Firoth on Sept 25, 2005 13:08:01 GMT -5
By the way, what is the minimum diameter of the tip of a weapon, stabby and non stabby
|
|
Taos
Grunt
Airstrikes for Everyone!
High Born, High Elf...Need I Say More
Posts: 358
|
Post by Taos on Sept 25, 2005 13:19:28 GMT -5
4.1.4. Two and one-half inch ruleāNo surface on a striking edge (sword tip, arrow head, spear head, javelin head, etc.) whether designed for stabbing or not, shall pass more than 0.5 inch through a 2.5 inch hole; swords with a semicircular tip, with a minimum 1.5 inch radius are exempt from this rule.
|
|