|
|
Post by Sir Storm Brightblade on Aug 18, 2006 16:00:26 GMT -5
how thick is a blue sword supposed to be? cause i did as the instructions say on the dag site and it said repeat until there are three layers on each side. i did and my sword seems a little too thick on the flatside. did i do that right or should i take off a layer on the flat?
|
|
|
|
Post by Kazzell KumoKi on Aug 18, 2006 16:26:18 GMT -5
2.5 in I belive
|
|
|
|
Post by Sir Storm Brightblade on Aug 18, 2006 16:30:29 GMT -5
ok ill see if that works
|
|
Baethor
High Council
Duk'Rik of the Bri'Ak Duraz.
That which does not kill me, has made a tactical error
Posts: 2,234
|
Post by Baethor on Aug 18, 2006 17:10:27 GMT -5
wait wait, its to flat from flat to flat? or to wide from striking edge to striking edge?
|
|
|
|
Post by Sir Storm Brightblade on Aug 18, 2006 20:23:15 GMT -5
striking to striking
|
|
|
|
Post by Zaron on Aug 18, 2006 21:15:06 GMT -5
They have to be 3" wide by 1.25" on the striking surface. It's a good idea to make them abit over that, but not too much, like perhaps 3.5 by 1.5.
If you need help I'll try to arrange a time this next week to either have you come here after school or I'll come to your house and help you out on your other equipment.
|
|
|
|
Post by Sir Storm Brightblade on Aug 20, 2006 11:02:07 GMT -5
ok, that works, and if u come to my house you'll be able to meet my convicts we had to bail out of the humane society lol. but ill see what i can work out.
|
|
